Master’s Thesis Investigates Development of Hybrid Composite Material for Aircraft Wings


Baghdad:A master’s thesis at the College of Electromechanical Engineering, University of Technology, has examined the development of a hybrid composite material for aircraft wings, focusing on the numerical and experimental investigation of its fatigue, mechanical, and electrical properties.



According to University of Technology – Iraq, the research, conducted under the specialization of Systems Engineering and Automation, was presented by researcher Noor Al-Huda Kareem. It aimed to provide an electromechanical analysis of a newly designed wing for a Cessna 172 aircraft, proposing a lightweight, high-performance composite material as an alternative to conventional aluminium structures.



The proposed composite material is made from unsaturated polyester resin reinforced with woven carbon fibres at different weight fractions and varying concentrations of porous silica nanoparticles (SiO2-type P). ANSYS software was used for three-dimensional finite element numerical simulation to analyze the aircraft wing, based on experimentally measured material properties.



The study found that increasing the carbon fibres and silica nanoparticles enhanced the tensile strength and fatigue resistance of the material. Additionally, the porous nanoparticles improved fibre-matrix bonding, stress distribution, and resistance to crack propagation, though electrical conductivity was reduced.



The thesis was evaluated by a discussion committee consisting of Prof. Dr. Abdul-Jabbar Owaid Hanfesh as Chair, Prof. Dr. Hala Salman Hassan and Assist. Prof. Dr. Tariq Mohammed Hamza as Members, and Prof. Dr. Raed Naim Huwaien and Prof. Dr. Ahlam Laibi Shraiji as Supervisors.